TEXTE BIENTOT DISPONIBLE EN FRANÇAIS
Sennheiser Profile Wireless is a versatile solution for freelance content creators and videographers that need a wireless audio solution to allows them to capture and create quickly and easily without sacrificing audio quality.
The 2.4GHz 2-channel set wireless system offers an all-in-one wireless microphone system with a two-channel 2.4 GHz receiver, two clip-on microphones, and versatile mounting and connection accessories housed in a portable charging bar that conveniently doubles as a handheld interview mic.
Designed for simplicity and convenience, Profile Wireless comes includes connectivity option to connect to a camera, laptop, phone, or alternatively to use it as a desktop mic. The receiver, two clip-on microphones, a cold shoe mounting adaptor, USB-C and Lightning connectors, microphone mounting clips and magnets for attachment to clothing can be stored in the system’s portable charging bar for portability. The OLED display on the receiver has a gyro sensor that automatically orients the display depending on positioning. The internal battery allows up to 7hours operational time (recording and transmitting), and up to 14hours (recording without transmitting). Charging time is 3hours or less.
The system features a 32-bit float recording capability - with each clip on microphone including 16GB memory; allowing for recording up to 30 hours of audio with high dynamic range and recovery of clipped audio. It also allows the user the option to activate Backup Recording Mode on the clip-on mics to turn on internal recording automatically if the wireless signal becomes weak or drops out. Safety Channel Mode on the receiver can be employed to output the audio at your selected sound level on the left channel and at a lower level on the right channel, to help protect against clipping. The transmitters have lockable 3.5mm TRS connector for secure connection to optional lavalier mic.
Included accessories: 1x Charging case, 1x USB-C ADPT USB-C adapter, 1x LIGHTNING ADPT Lightning adapter, 1x COLD SHOE mount, 2x CLIP MAGNET mounting magnets, 2x TX WINDSCREEN microphone windscreens, 1x CB WINDSCREEN charging bar windshield, 1x 3.5mm TRS coiled cable without lock, 1x USB-C to USB-C cable, 1x POUCH carrying pouch. Note: the included accessories are also listed separately in case spares or replacements are required.
Latency: Less than 8ms. Total harmonic distortion: Less than 1.5%. Audio frequency response: 60 - 20,000Hz. Low cut filter: 110Hz. Maximum SPL: 113dB SPL. Sampling rates: 48kHz. Signal to noise ratio: 78.5dB, A-weighted, typical. Operating humidity: 25-95%, non-condensing. Operating temperature: -10 to +45C. Dimensions (HxLxW): 72 x 197 x 90mm. Weight: 470g
Sennheiser Profile Wireless 1-channel Set shares many of the features as the 2-Channel Set, including 32-bit float recording with 16GB internal memory; however the system is single channel and a single transmitter is included. Specifications are as 2-Channel Set. Note, no charging case is included with the 1-Channel Set. This system can be upgraded to a 2-channel system by adding a second Profile Wireless transmitter and Charging Bar.
Included accessories: 1x CLIP MAGNET mounting magnet, 1x TX WINDSCREEN, 1x 3.5mm TRS coiled cable without lock, 2x USB-C to USB-C cable, 1x USB-C ADPT USB-C adapter, 1x LIGHTNING ADPT Lightning adapter, 1x COLD SHOE mount, and 1x SMALL POUCH carrying case.